Skip to main content
Contact us

Both parts passed inspection. Could tolerance stack-up explain the assembly misfit?

A windshield case explains tolerance stack-up. For a first production order, buyers can check which drawing was quoted and what dimensional inspection the price covers.

Kairen2 min read

Two parts do not fit on the assembly bench. Both suppliers’ inspection sheets say “pass.” Each dimension can be within its own limits while small variations add up across the assembly and exceed the final tolerance. Engineers call this tolerance stack-up.

A 2020 manufacturing white paper from the World Economic Forum and Boston Consulting Group explains how small, individually permitted variations can accumulate until an assembly falls outside its final tolerance. It describes an automaker working with a windshield supplier to use actual glass dimensions to adjust final assembly for slight differences between windshields.1

What the inspection sheet leaves open

A pass tells the assembler that a measurement was within a range. One piece may sit near the upper end and another near the lower end. To understand the fit, the assembler needs the actual dimensions of the pieces on the line and a way to match those numbers to the production batch.

The white paper describes a practical obstacle. Different companies keep the measurements from their own operations. Asking for another copy of each pass sheet will not explain what happened if no one can connect the measurements to the pieces that met at assembly. Suppliers have a reason to hesitate, too. Disclosing detailed quality data exposes their performance to a customer’s scrutiny.

Agree on the drawing and inspection scope before the first order

Once a fit problem reaches assembly, quality engineers need measurements from the affected batch. Purchasing has an earlier opportunity to ask which dimensions, on which drawing, the inspection fee covers. In Kairen Covenant’s fictional bracket example, a hole moved in the new revision. Even if the quote against the old drawing said “basic dimensional inspection included,” that wording alone would not promise a measurement of the new hole location.

Before ordering the first 300 parts, the buyer can ask “Will you inspect the changed dimension on Rev C, is that in the unit price, and can you return the measurements for this batch?” The answer can become a purchase condition. Diagnosing an eventual fit problem still takes measurements from the quality team and the supplier. Review drawing changes and inspection questions in Kairen Covenant’s bracket example

Notes

  1. Pages 10–11 cover the exchange of measured dimensions and the windshield example. The opening scene illustrates tolerance accumulation. WEF–BCG white paper, pp. 10–11 ↩

References

  1. Share to Gain: Unlocking Data Value in Manufacturing. World Economic Forum and Boston Consulting Group, 2020-01-13.

Cite this article

Kairen. “Both parts passed inspection. Could tolerance stack-up explain the assembly misfit?.” Kairen Insights, November 21, 2026. https://kairenhq.com/insights/when-a-defect-crosses-company-lines

About Kairen

Kairen builds sourcing software for product teams and suppliers to agree on part specs, prices, and delivery dates as designs take shape.

Explore Kairen Covenant